Kitchen and Dinning
AHURA : Innovative shelter solutions........delivered
>> Technical Specifications for Factory Block
Brand New Structures as per your versatile needs.
May be multi storied (G+1 / G+2).
Channel / pipe structure along the base periphery.
Gusset plates provided for strength wherever necessary.
No need for additional flooring as there is an existing shop floor.
Heavy duty tubular structure.
Aluminum single side glazing clips in the grid cavities.
Pre-laminated boards / glass in between the grid sections.
GI sheets may be provided with insulation and wooden paneling for specific applications where certain temperatures are to be maintained.
Tubular structure with 1mm GI sheet on the top.
HMPS “I” beams fabricated over the corner for additional load bearing and to remove centre posts which restrict internal movement.
Gusset plates wherever required.
Pre-laminated boards on the inside as false ceiling.
The main door shall be double shutter double skinned pressed steel with insulation / aluminum single shutter with a combination of glass and pre-laminated boards.
Heavy duty MS / aluminum aldrop shall also be supplied for additional safety.
Heavy duty MS / aluminum handles to operate the door.
Godrej cylindrical locks and door closers provided wherever required.
Wiring shall be ISI marked and in push type conduits over the MS pipes (Anchor).
Switches shall be ISI marked.
Light fittings of reputed make as per your requirement.
5 amp. plug provisions for your internal equipment.
15 amp. plug provisions for your heavy equipment.
Main inlet plug adaptors for efficient and leak proof flow of current.
MCB’s shall be provided for additional safety.
Wall mounted fans shall be provided.
AC units, window/split shall be installed as per your requirement.
The entire cabin shall be firmly grouted to your existing shop floor by means of several foundation bolts.
If grouting the cabins is not possible, heavy duty MS legs for superior support shall be provided as per your height suitability.
The entire structure shall be thoroughly sand blasted.
2 coats of epoxy paint over the entire structure (visible as well as hidden structure areas.
Paint shade shall be as per your choice.
Pre-laminated board shall be white shade.
Suitable top lifting for each prefabricated segment.
As per the customer’s specific requirement.